Feature-Tec’s C1.5 series Fiberglass Coalescer Elements are efficient filter-separator elements, the molded fiberglass tube is constructed of graded glass fibers, compressed to the proper density and bonded with inert phenolic binders.
The fiberglass tube is supported by a heavy-duty, spiral locked center core for superior resistance to collapse which caused by high differential pressure, the center core can withstand over 75 PSI differential pressure;
The metal end caps are mechanically attached to the center core for structural strength, the fiberglass media is attached to the end caps with a highly resistant adhesive to prevent any possibility of bypass;
Nitrile rubber (Buna N) gaskets are attached to the end caps with a polyurethane adhesive through a special heat treatment process, making it resistant to all hydrocarbons.
The standard Feature-Tec C1.5 series filter element will remove particles down to one micron without excessive differential pressure build-up. A cotton outer wrap protects the fiberglass from dirt and damage during shipment and protects the operator during element change-out.
Performance and Operation Data
- Nominal micron rating available: 10, 5, 1, & 0.5
- Recommended maximum operating temperature: 275℉
- Recommended maximum change-out pressure differential: 15 psi
- Gasket material: Buna N
Applications
For use in Feature-Tec, Peerless manufacturing, Perry equipment, King Tool and pall filter-separators and dry gas filters that uses 18, 36 or 72 inch filter cartridges.
